SAE145 – Electrospindle ATC Heavy Duty | AIR COOLED
Applications
Electrospindle projected for milling and drilling wood, plastic, and composite materials. Available in many combinations of power and torque to satisfy any customers requirements. Quick and easy maintenance, thanks to a “shaft kit”.
Available in ISO30 and HSK F63 configuration, short and long nose.
C axis available for all configuration.
Layout
Performance
TECHNICAL DATA
| wdt_ID | Column 1 | Column 2 | Column 3 |
|---|---|---|---|
| 1 | Base Dimension | extruded body | 145 x 145 mm |
| 2 | Power S1/Speed | kW/rpm*1000 | 6,5/7 Fig.1 |
| 3 | 8,5/7 Fig.2 | ||
| 7 | Tool taper | ISO30 | |
| 8 | HSK F63 | ||
| 9 | Nose | LN-Long nose | |
| 10 | SN-Short nose | ||
| 11 | Torque S1 | Nm | See Chart |
| 12 | Maximum frequency | Hz | 800 |
| 13 | Motor poles | n° | 4 |
| 14 | Max. speed | rpm | 24000 |
| 15 | Tool Clamping | Springs | |
| 16 | Tool Unlocking | pneumatic (min. 3 bar) | |
| 17 | Cylinder return | Spring | |
| 18 | Front Bearings | ceramics | |
| 19 | Rear Bearings | 18000 steel / 24000 ceramic | |
| 20 | Bearings lubrication | for life | |
| 21 | Nominal tension | Volts | 220/380 |
| 22 | Cooling system | electric fan 24 Volts | |
| 23 | Electric Board 4.0 | Base | Digital |
| 24 | Available protocols | can bus - can open - ethercat - I/o link - - etc… | |
| 25 | Encoder LB -1Vpp o TTL | opt | |
| 26 | Vibration Sensor | opt | |
| 27 | Bearing Temperature Sensor | opt |