SAB150 – Automatic tool change asynchronous motor long nose
Applications
Electrospindle specifically projected for 2 axis milling heads with 90-degree axis.
This version combines high performances in a very small housing.
Available short and long nose, asynchronous and synchronous versions, to satisfy any customers requirements.
Layout
Performance
TECHNICAL DATA
| wdt_ID | Column 1 | Column 2 | Column 3 |
|---|---|---|---|
| 1 | Base Dimension | block | 150 x 150 mm |
| 2 | Power S1/Speed | kW/rpm*1000 | 18.5 / 12 fig. 1 |
| 3 | 20 / 12 fig. 2 | ||
| 4 | 20 / 15 fig. 3 | ||
| 7 | Tool taper | HSK F63 | |
| 8 | Torque S1 | Nm | see chart |
| 9 | Maximum frequency | Hz | 800 |
| 10 | Motor poles | n° | 4 |
| 11 | Max. speed | rpm | 24000 |
| 12 | Tool Clamping | springs | |
| 13 | Tool Unlocking | pneumatic (min. 3 bar) | |
| 14 | Cylinder return | spring | |
| 15 | Front Bearings | ceramics | |
| 16 | Rear Bearings | 18000 steel / 24000 ceramic | |
| 17 | Bearings lubrication | for life | |
| 18 | Nominal tension | Volts | 380 |
| 19 | Cooling system | liquid | |
| 20 | Encoder -1Vpp o TTL | opt |